Support

Sdk Drivers

All the following IPC Firmware are cloud-based Firmware. Please note the following points before upgrading.

1）Before upgrading the IPC, please ensure that the NVR has been upgraded to the cloud version.

2）After the upgrade, the IPC needs restore to factory default settings

3）If an SD card is installed in the IPC, the SD card must be formatted after upgrading the IPC before it can resume normal recording.、

IPC-EBFR8MP-AI-S-WL / IPC-EDFR8MP-AI-S-WL / IPC-EDVR8MPZ-WL-AI(II)-C / IPC-EBVR8MPZ-WL-AI(II)-C / IPC-EDFR8MPWL-AI(II)-M-N

IPC-QBFR8MP-AI(II)-S / IPC-QDFR8MP-TD-AI(II)-S/B / IPC-QDVR8MPZ-AI(Ⅱ)-C / IPC-QBVR8MPZ-AI(Ⅱ)-C

VC26.34.1.3.0.0_260528

Fire‑smoke detection has been added to the AI functions, and two‑way audio is upgraded to full‑duplex mode.

VC26.34.1.3.0.0_251223

Upgrade to Cloud Version C1.3

IPC-WDFR8MP-TD-AI(II)-S / IPC-LBVL5MPZ-AI(II)-C / IPC-EBFR8MPWL-AI(II)-M / IPC-FIS-12MP-M

VC21.45.1.3.0.0_251217

IPC-QBFR5MP-AI(II)-S / IPC-QDFR5MP-TD-AI(II)-S/B / IPC-QDVR5MPZ-AI(Ⅱ)-C / IPC-EDF5MPIR-AI(II)-S / IPC-PIN-5MP-AI / IPC-ECB5MP-M-AI

IPC-EDFR5MP-AI-S-WL

VC31.35.1.3.6-260205

IPC-QBFR8MP-AI(II)-M-180 / IPC-QDFR8MP-AI(II)-M-180 / IPC-QBFR12MP-AI-S / IPC-QDFR12MP-TD-AI-S

VC30.85.1.3.0-260522

IPC-QDVR32MP-AI(II)-M-4

VC44.45.1.3.0-260713

Fire‑smoke detection has been added to the AI functions, Update the FTP upgrade path to 369G‑C

Note: You must upgrade to VC44.45.1.3.0‑260106 before updating to VC44.45.1.3.0‑260713.

VC44.45.1.3.0-260106

Upgrade to Cloud Version C1.3

IPC-PTZ-E25XIR2MP-C / IPC-PTZ-L33XIR5MP-C / IPC-PTZ-E4XIR8MP-MD

VC40.45.1.3.0.0_251218

VC43.85.1.3.0-260316

IPC-PTZ-E25XIR8MP-C

IPC-QDFR8MP-AI(II)-M-DL

VC43.85.1.3.0-260316

IPC-PTZ-E4XIR4MP-M

Coming Soon

IPC-TDFW4MP-AI(II)-M / IPC-TDFW8MP-AI(II)-M

V42.54.1.3.0.0_260428

IPC-QDFR8MP-AI(-II)-C

VC27.45.1.3.0-260428

IPC-FIS-12MP-MN

VC49.57.1.3.1-260420

Default fisheye mode out of factory

IPC-QBVR4MP-AI(II)-4G-SOLAR

VC50.35.1.1.0_260615